What To Do When You Have A Cracked Heat Exchanger

Natural gas furnaces are the main source of heating for most homes. They are invaluable during the chilly winter months and tend to be effective and long-lasting. They also make a large amount of heat and at a low cost compared to electric furnaces as natural gas is less expensive than electric energy. But natural gas furnaces are just as prone to show certain safety issues. They are more likely to incur safety issues when they are older systems that haven't had the annual maintenance they need. Properly maintained furnaces are more stable and less dangerous. Older and badly maintained furnaces could develop a cracked heat exchanger.

Heat Exchangers

The heat exchanger is the part that heats the air circulating through the ventilation system. Conduction is the mechanism by which it transfers heat through the materials of the exchanger. As it switches the burners on, they produce hot combustion gas that is gathered inside the metal chamber or chamber assortment. The heat exchanger heats the metal, and the fan moves the air around the heat exchanger, soaking up the heat from the walls of the furnace, and then running through the ductwork. After that, the combustion gas will heat the air. By-products are then propelled out of the environment launch system.

Cracked Heat Exchangers

The heat exchanger increases and contracts as it heats and cools down during operation. Constant stress can cause the heat exchanger to crack. At the annual maintenance, the heat exchanger is tested so if you keep things in check or have a new furnace, it shouldn't be that much of a concern. Nevertheless, excessive venting can cause deterioration to the heat exchanger, which can result in cracking.

Previous and Current Cracked Heat Exchangers

When there is a crack in the heat exchanger, the carbon monoxide will escape and reach where the members of the household are. It might cause a fire, which can cause a heat exchanger to burn and cause severe damage to your home.

You might believe you hear a clicking noise first as your furnace is running, or it could activate your carbon dioxide detector. The first thing you need to do is shut down your furnace and call for emergency repairs. It's never a bad idea to tell your local heating repair service that you didn't notice any signs but you're suspicious. This is especially true when your last tune-up of the heater was more than a year ago. They will help you with any problems you may have, and you can enjoy your heating again. Look for a heating repair professional near you.